How to increase shower head flow rate

It has probably happened to you at least once, or now it is the first time you have noticed that the water pressure in your shower head is very low. In order to find a solution to this problem, you must first understand why the pressure is getting low. Make a difference whether you live in a city or in a rural area. The first problem may be related to what the water pipes in your home look like. If there is a blockage or water leakage, this problem may occur during the shower. Another problem may be that the water pipes in the area where you live are old, in which case you can’t do anything about it. This time we will focus on what you can do to increase the water pressure in your shower head.

Try to unclog the shower head

You may not have noticed by now, but if the water in your house is hard, the calculus builds up very quickly on the shower head. Certain tricks can help you to clean your shower head. Never use strong and abrasive agents for this procedure. All you need is baking soda or vinegar and an old toothbrush. Regardless of whether you have problems with the water pressure in your home or not, it would not be a bad idea to clean this part in your bathroom from time to time as bacteria can build up on the shower head, which is very harmful to your health. Clean the shower head with an old toothbrush, dip it in a mix of water, vinegar, and baking soda, allow it to stand and rinse with warm water. If this doesn’t help you lift the water pressure, let’s move on to another solution.

Change the shower head

If you have tried cleaning the shower head and it has not helped to raise the water pressure, your shower head may be very old and unhelpful. It wouldn’t be a bad idea to consider buying a new shower head. Today you have a very large offer in the global market. If you want your shower head to have some additional features, look for high-pressure shower heads. In any case, this investment will pay off in the long run if you decide to buy a better quality shower head. If you have a problem with the water pressure in your home or not, replacing the shower head is always a good option if the old one is worn out.

Remove the flow restrictor

You may not know, but the manufacturers of shower heads have recently been incorporating a flow restrictor into every model of shower heads. They do this for two reasons. The first reason is to help their customers reduce their water bills. The second reason is the request made by the National Energy Law in the USA. If you already knew about this, then we just reminded you, and if you didn’t, now you know. The flow restrictor may be the reason why the water pressure is very low in your home. Try removing the flow restrictor and see if it makes any difference.

Check for the kinks under the shower head

It may sound very simple, but trying to do this can solve your whole problem. If your shower head is screwed onto a hose, see that the hose is not twisted somewhere by accident. Then pay attention to the kinks you see located either in the hose or in the water pipe. If the shower has a flexible line instead of a pipe, it is possible that the kinks are the ones that prevent the flow of water.

Look for the valve

Maybe this step will look like something too simple to solve your problem, but it doesn’t cost you anything to try. It doesn’t matter if you have moved into your new home, or have recently done some water-related work, you should note that the main water valve is fully open. It happens to people that, for some reason, whether it is repairing around the house or in the home, the water valves needed to be closed, and at the end of the job , they forget to open it to the end. If you do not know where it is, look in the basement or where the network system is connected to your home.

You can always instal a shower pump

If you have tried all of the above options and have not helped you, you will need to consider buying a shower pump. That option will cost you a little more than buying a new shower head, but it will forever solve your problem. The shower pump will increase the water pressure and allow you to enjoy every subsequent shower. We advise you not to install this pump yourself, unless you are a plumber, but to call a professional and consult with him or her regarding the purchase and installation of a shower pump. Depending on how much money you think you set aside for this product, you will get a response from a plumber about the possibility of installing it.

Additional tips:

  • Take a shower at a time when people in your area do not waste water on watering the grass and yard.
  • Clean your shower head regularly.
  • Always check that the main valve is fully open.
  • Take a shower at a time when the washing machine and the dishwasher are not working.
  • Always make sure there is water leakage somewhere.
  • Flush the water heater because the water tank can be blocked for some reason. This step can reduce any blockages in the pipes as well.

Some of the solutions offered are very simple and will not cost you anything, such as checking the main water valve and cleaning the shower head while others may be more or less expensive. Replacing the shower head can help, and installing a shower pump is a costly investment that can permanently solve this problem. Try the first ones first, and then think about buying the water pump.


Leave a Reply

Your email address will not be published. Required fields are marked *